19 — I-010S-P and O-010S-P unit data sheet
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 19-5
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
19.4 I-010S-P and O-010S-P software and installation feature
support
Table 19-4 provides a list of software-based features supported by the I-010S-P
indoor ONT and O-010S-P outdoor ONT and installation information.
Table 19-4 I-010S-P and O-010S-P software feature support
Sensitivity −28 dBm
Overload −8 dB
Rx damage threshold 5 dB
CID 72 bits
Rise and fall times 160 ps
Differential output voltage 300 mVp-p 1200 mVp-p
Jitter tolerance .75-.075 UI p-p
Signal detect assert level −29 dBm
Signal detect de-assert level −45 dBm
Hystersis 0.5 dB 6 dB
Signal detect output voltage - high 2 V
Signal detect output voltage - low 0.8 V
Parameter Minimum Typical Maximum
(2 of 2)
Features Chapter Cross reference for more information
General ONT and MDU
overview
General information common to
multiple devices and an explanation
of general system behaviors.
ONT and MDU overview
Service interface
specifications
— Ethernet interface specifications
Services supported — See the appropriate P-OLT user documentation for
service creation procedures and descriptions.
RSSI specifications ONT and MDU general and interface
technical specifications
RSSI specifications
Wi-Fi specification — —
Optical budget — ONT optical budget
Location and installation
options
How to install and replace an I-010S-P
or O-010S-P
Install an I-010S-P indoor or O-010S-P outdoor ONT
Replace an I-010S-P indoor or O-010S-P outdoor
ONT
HTTP management Information necessary to manage an
ONT at a local site using an HTTP
interface, CLI interface, CLI
interface, or butt set.
ONT management using an ONT interface
(1 of 2)
To Next Page
Loading...
