Alcatel-Lucent 7360 - NTP 113 - Replace a G-010 V-P ONT

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 113-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 113 — Replace a G-010V-P ONT
Purpose
This NTP provides the steps to replace a G-010V-P ONT.
General
The DLPs listed in this NTP describe mounting and cabling for the G-010V-P ONT.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for replacing the ONT:
• #2 Phillips screwdriver
• 1/4 in. (6 mm) flat blade screwdriver
• wire strippers
• fiber optic splicing tools
• RJ-45 cable plug crimp tool
• voltmeter or multimeter
• optical power meter
• drill and drill bits