Alcatel-Lucent 7360 - Access to ONT Interfaces; Utilities Supported by ONT Interfaces

1 — ONT and MDU overview
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 1-23
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
• perform OMCI and protocol tracing for problem diagnosis and resolution
• enter the SLID at an ONT, to activate ONTs with their provisioning data and
services using the SLID method, and to clear the SLID when an ONT is removed
Package C ONTs have a unique CLI that enable a field technician to retrieve and
modify the SLID and HTTP interface for viewing the current and entering a new
SLID.
The butt set allows a field technician to enter or clear the SLID at an ONT using a
POTS port.
Table 1-11 identifies with a check mark the utilities that an ONT interface supports.
Table 1-11 Utilities supported by ONT interfaces
Access to ONT interfaces
An ONT interface is accessible through a port on the ONT.
• HTTP interfaces are accessible through an Ethernet connection on indoor ONTs
with an HTTP server.
• The CLI interface is accessible through an Ethernet connection on indoor ONTs,
and a serial RS-232 craft connection on outdoor ONTs.
• The CLI interface for Package C ONTs is accessible through an Ethernet
connection and a serial RS-232 craft connection.
• The butt set is used through a POTS connection on an indoor or outdoor ONT.
Table 1-12 identifies the ONT interfaces, the ONTs that a specific ONT interface
supports, the field equipment that the ONT interface requires, and the ONT port on
which the field equipment must be connected.
Utilities HTTP
interface
CLI interface HTTP
interface for
Package C
ONTs
CLI interface
for Package C
ONTs
Butt set
Retrieval of ONT product
information
✓✓✓
Retrieval of ONT states ✓✓
Retrieval of ONT uptime ✓✓
Retrieval of RSSI ✓✓
Retrieval of status of LEDs ✓✓
Retrieval of ranging state ✓✓
Retrieval of software
download state
✓✓
ONT reset ✓✓✓
OMCI and protocol tracing ✓✓✓
Entry and clearing of SLID ✓✓✓✓✓