Alcatel-Lucent 7360 - I-010 G-B, I-020 G-M, and I-040 G-B Leds; I-010 G-B, I-020 G-M, and I-040 G-B Indoor ONT Leds; I-010 G-B, I-020 G-M, and I-040 G-B Indoor ONT Leds Descriptions

15 — I-010G-B, I-020G-M, or I-040G-B unit data sheet
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 15-5
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Note
(1)
The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
These indoor ONTs also feature an ON/OFF power button for manual shut down
when needed and a reset button.
15.5 I-010G-B, I-020G-M, and I-040G-B LEDs
Figure 15-2 shows the I-010G-B, I-020G-M, and I-040G-B indoor ONT LEDs.
Figure 15-2 I-010G-B, I-020G-M, and I-040G-B indoor ONT LEDs
Table 15-5 lists and describes the I-010G-B, I-020G-M, and I-040G-B indoor ONT
LEDs.
Table 15-5 I-010G-B, I-020G-M, and I-040G-B indoor ONT LEDs descriptions
LAN 2 LAN 3 LAN 4
21470
POWER
WAN
ALARM
LAN
POWER
WAN
ALARM
LAN
Indicator LED color and
behavior
LED behavior description
POWER Off
Green
Green flashing
Red
No power
Operating on ac power
ONT is starting up
Operating on battery backup power
WAN Green
Green flashing
Red
PON is connected and operating properly
Activity on the PON (except OMCI)
PON not connected but ONT has power
(1 of 2)