Alcatel-Lucent 7360 - NTP 142-4: I-020 G-F Indoor ONT Connections

NTP 142 — Install an I-020E-B, I-020E-H, or I-020G-F indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 142-5
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figure NTP 142-4: I-020G-F indoor ONT connections
7 Connect the Ethernet and power cables.
8 If used, configure the SLID (DLP 6).
9 Connect the fiber optic cable.
10 Verify the ONT LEDs.
11 Activate and test the services (DLP 128).
12 STOP. This procedure is complete.
20139
PON
2
Invisible laser
radiation.
Avoid direct
exposure to beam.
1
Power
connection
Fiber optic
port
Ethernet
ports