Alcatel-Lucent 7360 - NTP 118 - Install an I-010 G-A Indoor ONT

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 118-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 118 — Install an I-010G-A indoor
ONT
Purpose
This NTP provides the steps to install the I-010G-A indoor ONT at the subscriber
residence.
Prerequisite
Ethernet cables must be installed at the subscriber residence.
Parts
Table NTP 118-1 describes the hardware parts that are required to install an I-010G-A
indoor ONT.
Table NTP 118-1: Hardware parts required for ONT installation
Part Description
AC/DC power converter The power converter converts ac power to 12 V dc power.
Mounting screws (for wall
mounting the ONT)
Two screws are required with the following features:
• pan head style of screw head
• screw size of M4 or #6
These screws are not supplied by Alcatel-Lucent.