Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 136-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 136 — Install an I-011G-A, I-011G-B,
I-110G-A, or I-111G-A indoor
ONT
Purpose
This NTP provides the steps to install an I-011G-A, I-011G-B, I-110G-A, and I-111G-A
indoor ONT.
General
The steps listed in this NTP describe installing and cabling for I-011G-A, I-011G-B,
I-110G-A, and I-011G-A indoor ONTs and connection to a power converter.
Prerequisites
None.
Recommended tools
You may need the following tools for the installation:
• screwdriver for wall mounting the ONT unit
• Phillips screwdriver for connecting the SC/APC cable
• fiber optic splicing tools
• RJ-45 cable plug crimp tool
• voltmeter or multimeter
• optical power meter
• drill and drill bits
To Next Page
Loading...
