Alcatel-Lucent 7360 - Procedure 6-34 to Disable Tracing in Logging Mode; Procedure 6-35 to Copy a Trace Log to a TFTP Server

6 — ONT management using an ONT interface
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 6-51
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Procedure 6-34 To disable tracing in logging mode
Use this procedure to disable tracing in logging mode. You must disable tracing before
copying the trace log to a TFTP server.
1 Choose option 9, Enable protocol traces, from the Secondary menu. The
following menu of options appears:
Please select protocol
===============
1. OMCI
2. DHCP
3. ARP
4. IGMP
5. Logging options
Enter choice :
2 Choose one of the following protocols to disable tracing:
a Choose option 1 for OMCI.
b Choose option 2 for DHCP.
c Choose option 3 for ARP.
d Choose option 4 for IGMP.
After you choose a protocol, the following trace options appear:
Trace options
===============
1. Real-time traces
2. Enable logging
3. Disable logging
Enter choice :
3 Choose option 3, Disable logging. The following message appears:
Press enter key to continue...
4 Press ↵ to continue. The Secondary menu appears.
5 STOP. This procedure is complete.
Procedure 6-35 To copy a trace log to a TFTP server
Use this procedure to copy a trace log to a specified file on a TFTP server. You must
specify the trace log, the IP address of the TFTP server, and the file name of the log
file on the TFTP server.
1 Ensure tracing has been disabled, using Procedure 6-34.
2 Choose option 10, Upload traces from the Secondary menu. The following menu
of options appears: