EasyManua.ls Logo

Alcatel-Lucent 7360 - Page 503

Alcatel-Lucent 7360
1073 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 — ONT management using an ONT interface
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 6-71
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
L3Port Specifies the Layer 3 LAN port in unsigned
long bit definition format.
Bit31~16 : 0
Bit15~8: wireless LAN port
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| bit15:~bit12:reserved | bit11:WLAN_4 |
bit10:WLAN_3 | bit9:WLAN_2 |
bit8:WLAN_1 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bit7~0: LAN port
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| bit7:~bit4:reserved | bit3:LAN_4 |
bit2:LAN_3 | bit1:LAN_2 | bit0:LAN_1 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
default: 0;
1: enable;
<LANType L3Port="0"/>
LAN interface configuration
instanceID Specifies the instance ID. Set to 1 and
cannot be changed
<LANInterface
NumberOfInstance="1"
MaxNumber="2">
<LANInterfaceInstance
InstanceID="1"
LANName="Primary"
IpAddr="192.168.100.1"
SubnetMask="255.255.255.0"
DHCPServerEnable="enable"
StartIP="192.168.100.100"
EndIP="192.168.100.200"
Leasetime="259200"
Option60="dhcpOp"/>
</LANInterface>
LANName Specifies the LAN name, an alphanumeric
string of 1 to 256 characters
IpAddress Specifies the IPv4 address of the LAN
interface in dotted decimal notation
format.
SubnetMask Specifies the IP address subnet mask of the
LAN interface in dotted decimal format. The
default is 255.255.255.0.
DHCPSState Specifies whether DHCP is enabled or
disabled. The options are:
enable (default)
disable
When enabled,
the device
assigns IP
addresses, an IP
default
gateway, and
DNS servers.
StartIP Specifies the start and end range of the
DHCP IP address pool.
EndIP
Leasetime Specifies the client IP pool lease time, in
seconds. The range is 0 to 6048000. The
default is 259200 (72 hours). The maximum
is 70 days
Option60 Specifies the IP address for the device that
transits the DHCP discovery packets with
the matched option 60 functionality.
uPnP configuration
XML parameter Parameter values Sample XML Information
(3 of 6)

Table of Contents

Related product manuals