Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 137-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 137 — Replace an I-011G-A,
I-011G-B, I-110G-A, or
I-111G-A indoor ONT
Purpose
This NTP provides the steps to replace an I-011G-A, I-011G-B, I-110G-A, or I-111G-A
indoor ONT.
General
The steps listed in this NTP describe mounting and cabling for a replacement I-011G-A,
I-011G-B, I-110G-A, or I-111G-A indoor ONT.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for replacing the ONT:
• screwdriver for wall mounting the ONT unit
• Phillips screwdriver for connecting the SC/APC cable
• voltmeter or multimeter
• optical power meter
• wall mounting template
• drill and drill bits
To Next Page
Loading...
