NTP 152 — Replace an I-110G-P indoor ONT
NTP 152-4 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
9 If used, configure the SLID (DLP 129).
10 Verify the ONT LEDs and voltage status (DLP 127).
11 Activate and test the services (DLP 128).
12 STOP. This procedure is complete.
Note — A new SLID or the old SLID may be used with the replacement
ONT. If a new SLID is used, the new SLID must also be programmed at
the P-OLT using TL1 or a network manager. If the old SLID is used, no
changes need to be made at the P-OLT; see the appropriate P-OLT
Operations and Maintenance Procedures Guide for more details.
To Next Page
Loading...
