General User Interface Guidelines
Page 4-21
Disabling More Mode
To disable more mode, type
uic at the user prompt and press <Enter>.
A screen similar to the following will be displayed.
UI Configuration
1) Prompt : ‘$Menu-Path% ’
2) More : on
21) Lines : 22 lines
3) Verbose : off
4) Timeout : 5 minutes
Command {Item=Value/?/Help?Quit?Redraw?Save} (Redraw) :
Next, type 2=off at the submenu prompt and press <Enter>. The screen will be redrawn. Note
that more mode is now set to off.
UI Configuration
1) Prompt : ‘$Menu-Path% ’
2) More : off
21) Lines : 22 lines
3) Verbose : off
4) Timeout : 5 minutes
Command {Item=Value/?/Help?Quit?Redraw?Save} (Redraw) :
Type save at the submenu prompt and press <Enter>. More mode is now disabled.
♦ Reminder ♦
The switch’s table filtering feature cannot be used
when the
more mode is disabled. For more informa-
tion on UI table filtering, refer to UI Table Filtering
(Using Search and Filter Commands) on page 4-38.
To Next Page
Loading...
