Secure Switch Access
Page 8-6
Modify
This option allows you to modify information about an existing secured access filter. Enter the
name of the filter you wish to modify, as follows:
Modify Filter
-----------------
Filter Name: Test
The filter’s existing information will display. For example:
Source IP Source MAC Slot Port
Filter Name Address Address # #
-----------------------------------------------------------------------------------------------------------
Test ANY 10.2.8.13 5 2
Enter IP Address ( [a.b.c.d] ) :
Enter MAC Address ( [XXYYZZ: AABBCC] ) :
Is this MAC in Canonical or Non-Canonical (C or N) [C] :
Enter Slot :
Enter Port :
To change a value, type in the new value at the prompt. If you do not wish to modify a
particular field, press Enter and the existing user information will remain unchanged. To
change a field to ANY privilege, enter a value of 0, an asterisk (*), or ANY at the prompt.
Descriptions of the fields in the above display are provided earlier under the option ‘‘List’’ on
page 8-4.
Find
This option allows you to find information about a specified filter in the secured access data-
base. You must know the filter’s name in order to use this search feature. The following is a
sample display:
Find Filter
--------------
Filter Name: Test
To find a filter in the database, enter the name of the filter at the prompt. If the filter you
enter is a valid one, information on that filter will display similar to the following:
Source IP Source MAC Slot Port
Filter Name Address Address # #
-----------------------------------------------------------------------------------------------------------
Test ANY 10.2.8.13 5 2
To Next Page
Loading...
