Modifying 802.1Q Groups
Page 16-13
The ESX-K and GSX-K modules can also remap incom-
ing priority on an ingress port. If priority remapping
has been configured, the new priority will be carried
across the backplane. The priority information is used
to queue the packet, and is sent out in the packet if the
egress port is tagged.
Remember to save the changes to the service by entering
save at the system prompt when
finished.
To find the instance of a port service, use the
vas command. See Viewing 802.1Q Groups in a
Port on page 16-16 for more information.
To Next Page
Loading...
Need help?
General
