Modifying an AutoTracker VLAN
Page 22-25
Changing a VLAN’s Description
1. At the
Option= prompt enter a 2 and press <Enter>.
2. The following prompt displays:
Enter a new description:
Type in the revised description for this VLAN. The description can be up to 30 characters
long. Press <Enter> when you have completed the new description.
The system returns to the
Available Options menu. You can modify more attributes for this
VLAN, or quit modifying the VLAN by typing a 6.
Adding More Policies for This VLAN
1. At the
Option= prompt enter a 3 and press <Enter>.
2. The following menu displays:
Select rule type:
1. Port Rule
2. MAC Address Rule
3. Protocol Rule
4. Network Address Rule
5. User Defined Rule
6. Binding Rule
7. DHCP PORT Rule
8. DHCP MAC Rule
Enter rule type (1):
This is the same menu used by the cratvl command. This menu has eight options, some of
which contain multiple branching options. This menu is documented fully in Chapter 20,
“Configuring Group and VLAN Policies.” Please consult that chapter for information on
this menu.
When you have entered all new rule types, the system returns to the
Available Options
menu. You can modify more attributes for this VLAN, or quit modifying the VLAN by
typing a 6.
Deleting A Policy for This VLAN
1. At the
Option= prompt enter a 4 and press <Enter>.
2. The following menu displays:
Enter rule number to delete:
The rule number is listed with other information on the VLAN just after you entered the
modatvl command. Find the number corresponding to the rule you want to delete and
enter it at this prompt and press <Enter>. The rule is deleted and the system returns to the
Available Options menu. You can modify more attributes for this VLAN, or quit modifying
the
VLAN by typing a 6.
To Next Page
Loading...
Need help?
General
