Setting Global PPP Parameters
Page 30-8
Default Compression Type
Specifies the type of compression that is to be expected on incoming calls. The options are
None and STAC-LZS. If you set this parameter to None and your callers are using compression,
the caller’s connection request may be refused. See Data Compression on page 30-2 for a
description of STAC-LZS data compression.
Default Bridge Config Admin Status
Specifies whether the bridging function is to be negotiated for incoming calls. More
information on the bridging function can be found in Adding a PPP Entity on page 30-9. If
this parameter is disabled here, but disabled on the caller, the caller’s connection request may
be refused.
Default IP Config Admin Status
Specifies whether the IP routing function is to be negotiated for incoming calls. More
information on the IP routing function can be found in Adding a PPP Entity on page 30-9. If
this parameter is disabled here, but disabled on the caller, the caller’s connection request may
be refused.
Default IPX Config Admin Status
Specifies whether the IPX routing function is to be negotiated for incoming calls. More
information on the IPX routing function can be found in Adding a PPP Entity on page 30-9. If
this parameter is disabled here, but disabled on the caller, the caller’s connection request may
be refused.
To Next Page
Loading...
