Displaying PPP Entity Status
Page 30-20
IPCP Pkts IN/OUT
The total number of IP Control Protocol (IPCP) packets received (
In) and transmitted (Out) on
this PPP connection.
IPCP Pkts IN/OUT
The total number of IP Control Protocol (IPCP) packets received (
In) and transmitted (Out) on
this PPP connection.
BCP Pkts IN/OUT
The total number of BCP packets received (
In) and transmitted (Out) for this PPP connection.
CCP Pkts IN/OUT
The total number of CCP packets received (
In) and transmitted (Out) for this PPP connection.
Also shown on this screen are two tables of statistics. The first table shows various data
transmission statistics shown both as a total and sorted by the type of frame encapsulation
being used (
Total, Ethernet, 8025, FDDI, IP, IPX, and BPDU). The columns in the first table show
the following information for each type of frame encapsulation: the number of packets
received (Packets In), the number of packets transmitted (Packets Out), the sum of received
and transmitted packets (Packets In+Out), the number of octets received (Octets In), the
number of octets transmitted (Octets Out), and the percentages received (%In) and transmitted
(%Out) for each type of frame encapsulation.
The second table shows statistics related to the performance of STAC-LZS compression sorted
by
In, Out, and In+Out categories. The column headings show the number of compressed
frames and octets, the number of uncompressed frames and octets, and the overall
compression ratio represented by the previous figures.
To Next Page
Loading...
Need help?
General
