EasyManuals Logo

Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

Allen-Bradley PowerFlex 6000
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
134 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
DC Bus Lower Limit
Linear Number: P397
Default Value: 700V (2.3/2.4 kV)
900V(4.0/4.16 kV)
950V (3.0/3.3/6.3/6.6 kV)
1000V (6.0/6.9/10.0/11.0 kV)
Minimum Value: 0V
Maximum Value: 32767V
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the lower limit for DC bus voltage.
DC Bus Upper Limit
Linear Number: P398
Default Value: 800V (2.3/2.4 kV)
1000V(4.0/4.16 kV)
1050V (3.0/3.3/6.0/6.3/6.6/6.9/10.0/11.0 kV)
Minimum Value: 0V
Maximum Value: 32767V
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the upper limit for DC bus voltage.
Deceleration Iq Threshold
Linear Number: P434
Default Value: 25%
Minimum Value: 5%
Maximum Value: 100%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the threshold for deceleration Iq.
Deceleration Control Frequency Range
Linear Number: P435
Default Value: 20%
Minimum Value: 0%
Maximum Value: 100%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the frequency range for deceleration control.

Table of Contents

Other manuals for Allen-Bradley PowerFlex 6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley PowerFlex 6000 and is the answer not in the manual?

Allen-Bradley PowerFlex 6000 Specifications

General IconGeneral
BrandAllen-Bradley
ModelPowerFlex 6000
CategoryDC Drives
LanguageEnglish

Related product manuals