Allen-Bradley PowerFlex 6000 - P Parameters

66 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
Flux Delay
Linear Number: P271
Default Value: 50 ms
Minimum Value: 0 ms
Maximum Value: 5000 ms
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Flux Delay.
SVC Low Frequency Acceleration Time Enable Frequency Range Upper Limit
Linear Number: P291
Default Value: 10%
Minimum Value: 0%
Maximum Value: 100%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the upper limit for SVC Low Frequency Acceleration Time
Enable Frequency Range.
SVC Low Frequency Acceleration Time
Linear Number: P292
Default Value: 5.0 s
Minimum Value: 1.0 s
Maximum Value: 3276.7 s
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the SVC Low Frequency Acceleration Time.
SVC Flux Voltage Boost Coefficient
Linear Number: P293
Default Value: 300%
Minimum Value: 0%
Maximum Value: 500%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the SVC Flux Voltage Boost Coefficient.