EasyManuals Logo

AMX Enova DGX 100 Series Hardware Reference Manual

AMX Enova DGX 100 Series
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
HDMI Input & Output Boards
97
Enova Digital Media Switchers - Hardware Reference Manual
DGX HDMI Input Board- Specifications (Cont.)
HDMI w/HDCP DESCRIPTION
3D Format Support • Frame Packing 1080p up to 24 Hz
• Frame Packing 720P up to 50/60 Hz
• Frame Packing 1080i up to 50/60 Hz
• Top-Bottom 1080p up to 24 Hz
• Top-Bottom 720p up to 50/60 Hz
• Side-by-Side Half 1080i up to 50/60 Hz
Note: If scale is present on corresponding output board or the RX it must be set to Bypass mode
Audio Format Support • Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS-HD Master Audio, DTS, 2 CH through
8 CH L-PCM
• Dolby Digital and DTS support up to 48 kHz, 5.1 channels
Audio Resolution 16 bit to 24 bit
Audio Sample Rate 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Local Audio Support Yes, extraction of 2 CH L-PCM selectable by channel
Audio Switching Board Support • Supports break-away audio switching of 2 CH L-PCM for all channels
• Supports down-mix from one input channel of Dolby True-HD, Dolby Digital, DTS-HD, DTS, or 2 to 8
channel L-PCM
Note: Down-mix supported on 4K video inputs with pixel clocks up to 297 MHz
(up to 4096x2160p@30 Hz)
DDC/EDID Support • EDID provided by Enova DGX Digital Media Switcher to the digital (HDMI) port input and includes
presets
• EDID is user re-programmable
HDCP Support • Yes, including HDCP 1.x and HDCP 2.x for full matrix HDCP support (includes any input to any or all
outputs)
• HDCP 2.2 support required by input/output board for passage of HDCP 2.2 premium content
• Key Management System
• AMX HDCP InstaGate Pro™ Technology
• Key support up to 31devices per output
CEC Support None
Input Propagation Delay 5 us
Connectors 4 HDMI Type A Female Ports
4K HDMI INPUT DEFAULT SHIPPING EDID
1
Detailed Timing Descriptors
(DTD)
• 3840x2160p
1
@ 30 Hz CTA (VIC 95)
• 1920x1080p @ 60 Hz CTA (VIC 16)
• 1920x1080p @ 50 Hz CTA (VIC 31)
• 1920x1200 @ 50 Hz CVR
• 1920x1200 @ 60 Hz CVR
1
This is the preferred format DTD identified in the EDID.
Note: The default EDID can be configured to include support for 4K 60 4:4:4, HDMI mode or audio
capabilities or overwritten with custom EDID capture from output devices
Standard Timing Identification • 1920x1200 @ 60 Hz
• 1680x1050@ 60 Hz
• 1600x1200 @ 60 Hz
• 1440x900 @ 60 Hz
• 1360x765 @ 60 Hz
• 1280x1024 @ 60 Hz
• 1280x800 @ 60 Hz
• 1280x720 @ 60 Hz
Established Timing • 1280x1024 @ 75 Hz
• 1152x870 @ 75 Hz
• 1024x768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz
• 832x624 @ 75 Hz
• 800x600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz
• 720x400 @ 70 Hz, 88 Hz
• 640x480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz

Table of Contents

Other manuals for AMX Enova DGX 100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AMX Enova DGX 100 Series and is the answer not in the manual?

AMX Enova DGX 100 Series Specifications

General IconGeneral
BrandAMX
ModelEnova DGX 100 Series
CategorySwitch
LanguageEnglish

Related product manuals