arcelik Beko B13 - Page 101

B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
101
LIKELY
CUSTOMER
COMPLAINT
LIKELY
CUSTOMER
COMPLAINT
* Program remains
incomplete.
* The machine does
not rotate.
* Machine takes
in little/too
much water
* Machine did
not spin.
* Time extended
* Machine made
another rinsing
although I did
not select extra
rinse.
* Machine did not
spin.
* Time extended.
* Machine does
not operate.
*Machine does
not take in
water.
* Programme
lasted longer.
* Machine did
not heat well.
ERROR CODE
ERROR NAME
*BLAC motor
communication
cable open
circuit error
*Flowmeter
Open\Short
circuit
*Foam
caused the
programme
to end
without
spinning.
*Unbalanced
load caused
the programme
to end without
spinning.
*Door locked
signal (zero
cross) is not
received
*Operation
voltage is out
of limit
Important Note:
Error codes given do not always mean that the error has arisen
from the components.
Socket and cable connections must be checked in the first
place.
Make sure that the problems do not arise from loose contact.