arcelik Beko B13 - Step Nr. 17: How Many Times the Service Mode was Completed Without any Problem

B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
96
10.18. Step nr. 17: How Many Times the Service Mode Was Completed without
any Problem?
Explanation:
This step shows how many times the "Service Test" mode has been completed without any
error.
If no error is encountered in the "Service Test" mode and the "Service Test" mode is
completed without problems, this step starts. Counter is increased by one and stored in the
permanent memory.
If en error is encountered, this step is not entered and thus, the counter is not increased.
Indicators on the interface:
"XX" is displayed in the remaining time field. XX shows the number of tests completed
without error.
Condition to switch to the next step:
System returns to first step if “Start/Pause” button is pressed.
Timeout: If “Start/Pause” button is not pressed in 2 minutes, "OFF" mode is started.
Switching to the next step:
“Start / Pause” button is pressed.
NOTE : If "ON/OFF" button is pressed for 3 seconds, machine goes to "OFF" mode.