EasyManua.ls Logo

arcelik Beko B13 - Maintenance and Cleaning; Cleaning the detergent drawer; Cleaning the loading door and the drum

arcelik Beko B13
186 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
40
7. MAINTENANCE AND CLEANING
Service life of product extends and frequently experienced problems will be reduced if it is cleaned
at regular intervals.
7.1. Cleaning the detergent drawer
Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order
to prevent accumulation of powder detergent in time.
Figure 7.1 Cleaning the detergent drawer
1. Press the dotted point on the siphon in the softener compartment and pull towards you until the
compartment is removed from the machine.
If more than normal amount of water and softener mixture starts to gather in the softener
compartment, the siphon must be cleaned.
2. Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin. In
order to prevent the residues to contact your skin, clean it with an appropriate brush by wearing
a pair of gloves.
3. Insert the drawer back into its place after cleaning and make sure that it is seated well.
7.2. Cleaning the loading door and the drum
Residues of softener, detergent and dirt may accumulate in your machine in time and may cause
unpleasant odours and washing complaints. To avoid this, use the
Drum Cleaning
programme. If
your machine is not featured with
Drum Cleaning
programme, use Cottons-90 programme and
select Additional
Water
or
Extra Rinse
auxiliary functions as well. Run the programme without any
laundry in the machine. Before starting the programme, put max. 100 g of powder anti-limescale
into the main wash detergent compartment (compartment nr. 2). If the anti-limescale is in tablet
form, put only one tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of
cloth after the programme has come to an end.
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is left in the drum.

Table of Contents

Related product manuals