B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
119
12.3.16. E18
Is there E18 error?
Yes
Explain the following
unbalanced load prevention
methods to the customer.
Reasons for ending the programme without spinning as a result of unbalanced
load detection
1) When you use the machine with less
laundry, the laundry may accumulate at
one part of the drum. Washing machine may be damaged in case of higher
speeds with an unbalanced load. Therefore, when the calculated unbalanced load
in the machine is more than the limit value, the machine does not spin for safety
reasons.
2) In case of running the machine with a single pullover, bathrobe or towel,
laundry very likely tends to accumulate at one point in the drum. Try to avoid
washing laundry consisting of one piece as much as possible.
*Unbalanced
load caused the
programme to
end without
spinning.
E18
* Machine did not
spin.
* Time extended.
To Next Page
Loading...
