arcelik Beko B13 - Motor

B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
11
4.7. Motor
4.7.1. Tip : Askoll / Atlas / Three-phase, brushless
permanent magnet, sinusoidal control
4.7.2. Withdrawn Power* (Spinning)(W) : 125 / 900
4.7.3. Current* (Spinning)(A) : 13000 / 16000
4.7.5. Starting : Electronic speed control
* Power and current values vary according to load and speed conditions
4.8. Pump
4.8.1.1. Power (W) : 30
4.8.1.2. Flow rate (I/min) : 15
4.8.1.3. Delivery Height (m) : 1
4.8.1.4. Rotor Speed (rpm) : 3000
4.8.1.5. Motor Type : Synchronism
4.8.1. Jet System Pump
4.8.2.1. Power (W) : 30
4.8.2.2. Flow rate (I/min) : 15
4.8.2.3. Delivery Height (m) : 1
4.8.2.4. Rotor Speed (rpm) : 3000
4.8.2.5. Motor Type : Synchronism
4.9. Heater
4.9.1. Heater (Double thermic) (W) : 230 V – 1950 W (2 T/F)
4.10. Water Inlet
: Cold/Hot and Cold
4.11. Body
4.11.1. Material : DKP Sheet Iron
4.11.2. Final Process : Powder paint
4.12. Drum
4.12.1. Material : Rustproof sheet iron
4.12.2. Volume (l) : 55-60-65
4.12.3. Wash Speed (rpm) : 35 / 52 (23-Hand Wash)
4.12.4. Spin Speed (rpm) : Max.xxxxx
4.12.5. Front Cover Hole Diameter (mm) : 300-340