B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
90
Switching to the next step:
“Start / Pause” button is pressed.
NOTE : If "ON/OFF" button is pressed for 3 seconds, machine goes to "OFF" mode.
10.9. Step nr. 8: Steam Heater Control (Id there is no steam heater, step will
be skipped.)
Explanation:
Steam valve is driven.
Current must be checked on the mains input.
Indicators on the interface:
"Test" is displayed on the remining time indicator.
Condition to switch to the next step:
Timeout: If “Start/Pause” button is not pressed in 2 minutes, "OFF" mode is started.
Switching to the next step:
“Start / Pause” button is pressed.
NOTE : If "ON/OFF" button is pressed for 3 seconds, machine goes to "OFF" mode.
.
To Next Page
Loading...
