B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
36
Programme time may differ from the values in the "Programme and consumption
table" depending on the water pressure, water hardness and temperature, ambient
temperature, amount and the type of laundry, auxiliary functions selected and the
changes at the mains voltage.
6.13. End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After
pressing End Time button, the time displayed is programme's estimated ending time.
If the End Time is adjusted, End Time indicator is illuminated.
Figure 6.15
In order for the End Time function to be activated and the programme to be completed at the end
of the specified time,you must always press Start / Pause button after adjusting the time.
Figure 6.16
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
Do not use liquid detergents when you activate End Time function! There is the risk
of staining of the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator
illuminates.
4 Press Start / Pause button. Time countdown starts. In the middle of displayed End Time, ":"
starts flashing.
Additional laundry may be loaded during the End Time countdown period.
At the end of the countdown, End Time indicator turns off, washing cycle starts and the
time of the selected programme appears on the display.
When End Time is selected, the time displayed is the end time plus selected programme
duration.
6.14. Starting the programme
1 Press the Start / Pause button to start the programme.
2 The Start / Pause button which was off before starts to illuminate steadily now, indicating that the
programme has started.
To Next Page
Loading...
