B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
35
Some functions cannot be selected together.
If a second auxiliary function conflicting with the first one is selected before starting
the machine, the function selected first will be canceled and the second auxiliary
function selection will remain active. For example, if you want to select Quick Wash
after you have selected the Additional Water, Additional Water will be canceled and
Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected.
(See, “Programme and consumption table.")
Some programmes have auxiliary functions that must be operated simultaneously.
Those functions cannot be cancelled. The frame of the auxiliary function will not be
illuminated, only inner area will be illuminated.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry.
Not using the Prewash will save energy, water, detergent and time.
• Quick Wash
This function can be used in Cottons and Synthetics programmes.
It decreases the washing times and also the number of rinsing steps for lightly soiled laundry.
When you select this function, load your machine with half of the maximum laundry
specified in the programme table.
• Extra Rinse
This function enables you to wash and rinse your laundry with plenty of water in Cottons,
Synthetics, Lingerie, and Woolens programmes. Use this function for delicate laundry that creases
easily.
When you select this function, load your machine with half of the maximum laundry
specified in the programme table.
• Anti-creasing
This function creases the clothes lesser when they are being washed. Drum rotation movements
are reduced and spin speed is limited to prevent creasing.
In addition, washing is done with a higher water level.
• Rinse hold
If you are not going to unload your clothes immediately after the programme completes, you can
use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from
getting wrinkled when there is no water in the machine. Press Start / Pause button after this
process if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme will resume. Water is drained, laundry is spun and the programme is completed.
• Night Mode
Use to wash the cottons with lesser energy consumption and silently.
Spin steps are cancelled for a silent washing and the cycle ends with the Rinse Hold step.
After completion of the programme, run Spin cycle to spin the laundry.
Time display
Remaining time for the completion of the programme while it is running is displayed as “01:30” in
hours and minutes format.
To Next Page
Loading...
