B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
92
10.12. Step nr. 11: Detergent box control and Detergent box siphon control
Explanation:
Prewash valve and main wash valve are driven together.
Indicators on the interface:
"Test" is displayed on the remining time indicator.
Condition to switch to the next step:
It takes water until "Start / Pause" button is pressed or up to the overflow level.
Timeout: If “Start/Pause” button is not pressed in 2 minutes, "OFF" mode is started.
Switching to the next step:
“Start / Pause” button is pressed.
NOTE : If "ON/OFF" button is pressed for 3 seconds, machine goes to "OFF" mode.
10.13. Step nr. 12: Hot water valve control
(This step will be performed if there is Hot Water input on the machine. If
not, next step will be switched to)
Explanation:
Hot water valve is driven (If there is Hot Water Valve).
Indicators on the interface:
"Test" is displayed on the remining time indicator.
Condition to switch to the next step:
It takes water until "Start / Pause" button is pressed or up to the overflow level.
Timeout: If “Start/Pause” button is not pressed in 2 minutes, "OFF" mode is started.
Switching to the next step:
“Start / Pause” button is pressed.
NOTE : If "ON/OFF" button is pressed for 3 seconds, machine goes to "OFF" mode.
To Next Page
Loading...
