arcelik Beko B13 - Water Level Sensor Attachment; Detachment; Parasite Filter Attachment;Detachment; Supply Cable Attachment; Detachment; Picture 15.82 Water Level Sensor Attachment

B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
162
15.11. Water Level Sensor Attachment / Detachment
Picture 15.82 Water level sensor attachment
15.12. Parasite Filter Attachment/Detachment
 Upper table is removed.
 Parasite filter cable ends are taken out.
 2 screws at the back side of the body which connect the terminal group to the body are
removed.
 M8 nut connecting the parasite filter to the terminal group is held with a double-end
wrench and the parasite filter is turned by hand to remove it.
15.13. Supply Cable Attachment / Detachment
Picture 15.83 Supply cable attachment
Cam of the water level sensor
attached on the body is removed
and taken out.
Water level sensor socket and
airing hose are taken out.
Cable Holder Screw is
removed.
Supply Cable terminal ends
are removed from the parasite
filter and taken out.