B13 BETTER (B13 BEST APPEARANCE) WASHING MACHINE SERVICE HANDBOOK
44
b Turn and loosen the pump filter until water starts to flow (counterclockwise). Fill the flowing water
into the container you have placed in front of the filter. Always keep a piece of cloth handy to
absorb any spilled water.
c When the water inside the machine is finished, take out the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.
5 Replace the filter.
6 If the filter cap is composed of two pieces, close the filter cap by pressing on the tab.
If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part
to close.
To Next Page
Loading...
