AudioCodes Mediant 800 - Page 1190

CHAPTER71 Patterns for Denoting Phone Numbers and SIP URIs
Mediant 800 Gateway & E-SBC | User's Manual
Pattern Description
For example, you can configure a manipulation rule that changes the received
number +49 (7303) 165-xxxxx to +49 \287303\29 165-xxxxx, where \28 is the
ASCII HEX value for “(“and \29 is the ASCII HEX value for “)”. The
manipulation rule in this example would denote the parenthesis in the
destination number prefix using "x" wildcards (e.g., xx165xxxxx#); the prefix
to add to the number would include the HEX values (e.g., +49 \287303\29
165-).
Below is a list of common ASCII characters and their corresponding HEX
values:
■ *: \2a
■ (: \28
■ ): \29
■ \: \5c
■ /: \2f
- 1150 -