EasyManuals Logo

AudioCodes Mediant 800 User Manual

AudioCodes Mediant 800
1482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #242 background imageLoading...
Page #242 background image
CHAPTER16 Services
Mediant 800 Gateway & E-SBC | User's Manual
To view or delete DHCP clients:
1. Open the DHCP Servers table (see Configuring the DHCP Server).
2. Select the row of the desired DHCP server for which you want to view DHCP clients, and then
click the DHCP Clients link located below the table; the DHCP Clients table opens:
The table displays the following per client:
Index: Table index number.
DHCP Server Index: The index number of the configured DHCP server scope in the
DHCP Server table (see Configuring the DHCP Server) with which the client is
associated.
IP Address: IP address assigned to the DHCP client by the DHCP server.
MAC Address: MAC address of the DHCP client.
Lease Expiration: Date on which the lease of the DHCP client's IP address obtained
from the DHCP server expires.
3. To delete a client:
a. Select the table row index of the DHCP client that you want to delete.
b. Click the Action button, and then from the drop-down menu, choose Delete; a
confirmation message appears.
c. Click OK to confirm deletion.
SIP-based Media Recording
The device can record SIP-based media call sessions traversing it. The media recording support is
in accordance with the Session Recording Protocol (SIPRec), which describes architectures for
deploying session recording solutions and specifies requirements for extensions to SIP that will
manage delivery of RTP media to a recording device. The device's SIPRec feature is in compliance
with the following:
RFC 6341 (Use Cases and Requirements for SIP-Based Media Recording)
Session Recording Protocol (draft-ietf-siprec-protocol-02)
Architecture (draft-ietf-siprec-architecture-03)
RFC 7865 (Session Initiation Protocol (SIP) Recording Metadata)
Warning for Deployments in France: The device supports SIP-based Media Recording
(SIPRec) according to RFC 6341. As such, you must adhere to the Commission
Nationale Informatique et Liberté’s (CNIL) directive (https://www.cnil.fr/en/rights-and-
obligations ) and be aware that article R226- 15 applies penalties to the malicious
interception, diversion, use or disclosure of correspondence sent, transmitted or
received by means of telecommunication, or the setting up of a device designed to
produce such interceptions.
- 202 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 800 and is the answer not in the manual?

AudioCodes Mediant 800 Specifications

General IconGeneral
ProtocolsSIP, H.323
Digital Interfaces1/2 E1/T1 PRI
ManagementWeb, CLI, SNMP
Mounting19-inch rack
CodecsG.711, G.729, G.722, G.723.1
Power Supply100-240V AC
Operating Temperature0 to 40°C
Storage Temperature-25 to 70°C
Humidity10% to 90% non-condensing

Related product manuals