EasyManua.ls Logo

AudioCodes Mediant 800 - Quality of Service Parameters

AudioCodes Mediant 800
1482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER72 Configuration Parameters Reference
Mediant 800 Gateway & E-SBC | User's Manual
Table 72-11:OSN Parameters
Parameter Description
'OSN Native VLAN
ID'
configure
system >
interface osn
> native-vlan
<id>
[OSNAccessVlan]
Defines the OSN Native VLAN ID.
The valid value is 0 to 4000. When set to 0 (default), the OSN uses the
device's OAMP VLAN ID. When set to any other value, it specifies a
VLAN ID configured in the Ethernet Devices table and which is
assigned to a Media and/or Control application in the IP Interfaces
table.
'Block OSN Port'
configure
system >
interface osn
> shutdown
[OSNBlockPort]
Enables or disables the Ethernet port of the internal switch that
interfaces with the OSN.
[0] Enable (default)
[1] Disable
configure
network >
network-
settings >
osn-internal-
vlan
[OSNInternalVLAN]
Enables a single management platform when the device is deployed as
a Survivable Branch Appliance (SBA) in a Microsoft Skype for Business
environment. It allows configuration and monitoring of the
Gateway/SBC device through the SBA Management Interface.
[0] = Disable (default)
[1] = Enable
For more information, refer to the SBA Installation and Maintenance
Manual.
Quality of Service Parameters
The Quality of Service (QoS) parameters are described in the table below.
Table 72-12:QoS Parameters
Parameter Description
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
Layer-3 Class of Service (TOS/DiffServ) Parameters
CLI path: configure network > qos application-mapping
'Media Premium QoS'
media-qos
[PremiumServiceClassMediaDiffServ]
Global parameter defining the DiffServ value for
Premium Media CoS content.
You can also configure this feature per specific
calls, using IP Profiles (IpProfile_IPDiffServ) or
Tel Profiles (TelProfile_IPDiffServ). For a detailed
description of the parameter and To configure the
feature, see Configuring IP Profiles or Configuring
Tel Profiles.
Note: If the feature is configured for a specific
profile, the settings of this global parameter is
ignored for calls associated with the profile.
- 1179 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Related product manuals