CHAPTER6 Web-Based Management
Mediant 800 Gateway & E-SBC | User's Manual
Once enabled, each time you login to the device, the Login Information window is displayed, as
shown in the example below:
To close the window, click Close.
Viewing Logged-In User Information
The username of the currently logged in user is displayed in the top-right corner of the Web
interface. If you click the username (e.g., "Admin"), a drop-down box appears, for example:
The following information is displayed:
■ Username (e.g., Admin) of currently logged-in user
■ User level (e.g., Security Administrator) of currently logged-in user
■ Duration of the current Web session (starting from login)
The following buttons are also displayed:
■ Log Out: Logs you out of the Web session (see Logging Off the Web Interface)
■ Change Password: Allows you to change your login password (see Changing Login
Password by All User Levels on the next page)
Configuring Web Session and Access Settings
The following procedure describes how to configure security features related to Web user sessions
and access.
- 51 -
To Next Page
Loading...
Need help?
General
