To Next Page

To Previous Page

CHAPTER49 Automatic Provisioning

Mediant 800 Gateway & E-SBC | User's Manual

AutoCmpFileUrl = 'https://www.company.com/sw.cmp'

◆ CLI:

# configure system

(config-system)# automatic update

(automatic-update)# auto-firmware 'http://www.company.com/sw.cmp'

c. Automatic Update of Call Progress Tone file:

◆ ini File:

CptFileURL = 'https://www.company.com/call_progress.dat'

◆ CLI:

# configure system

(config-system)# automatic update

(automatic-update)# call-progress-tones 'http://www.company.com/call_

progress.dat'

d. Automatic Update of ini configuration file:

◆ ini File:

IniFileURL = 'https://www.company.com/config.ini'

◆ CLI:

# configure system

(config-system)# automatic update

(automatic-update)# voice-configuration

'http://www.company.com/config.ini'

e. Enable Cyclical Redundancy Check (CRC) on downloaded ini file:

◆ ini File:

AUPDCheckIfIniChanged = 1

◆ CLI:

# configure system

(config-system)# automatic update

(automatic-update)# crc-check regular

4. Power down and then power up the device.

Automatic Update from Remote Servers

This example describes how to configure the Automatic Update feature where files are stored and

downloaded from different file server types. The example scenario includes the following:

■ FTPS server at ftpserver.corp.com for storing the License Key file. The login credentials to the

server are username "root" and password "wheel".

■ HTTP server at www.company.com for storing the configuration file.

- 963 -

AudioCodes Mediant 800 User Manual

Other manuals for AudioCodes Mediant 800