AudioCodes Mediant 800 - Backing up and Restoring HA Configuration

CHAPTER42 HA Maintenance
Mediant 800 Gateway & E-SBC | User's Manual
Backing Up and Restoring HA Configuration
Once you have your HA system up and running, you can make a backup of your HA configuration,
by saving an ini configuration file from the active device. If your HA system fails, for whatever
reason, you can simply load this file to the devices to restore HA.
➢ To backup and then restore HA:
1. Save the ini file from the active device to a folder on your PC. Store this file in a safe location
for future use (i.e., HA backup).
2. If a failure occurs in one or both devices, load the backup ini file to the failed device(s).
If one or both devices in the HA system have been replaced (RMA) for whatever reason
(e.g., a hardware failure), before loading the file, update the file with the new MAC
addresses (HALocalMAC and/or HARemoteMAC).
- 900 -