EasyManua.ls Logo

AudioCodes Mediant 800 - Page 1444

AudioCodes Mediant 800
1482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER72 Configuration Parameters Reference
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
Load-balancing between proxies is
disabled ('Proxy Load Balancing
Method' parameter is set to Disable).
configure voip > sbc settings >
sbc-max-fwd-limit
[SBCMaxForwardsLimit]
Defines the Max-Forwards SIP header
value. The Max-Forwards header is used to
limit the number of servers (such as
proxies) that can forward the SIP request.
The Max-Forwards value indicates the
remaining number of times this request
message is allowed to be forwarded. This
count is decremented by each server that
forwards the request.
The parameter affects the Max-Forwards
header in the received message as follows:
If the received header’s original value is
0, the message is not passed on and is
rejected.
If the received header’s original value is
less than the parameter's value, the
header’s value is decremented before
being sent on.
If the received header’s original value is
greater than the parameter's value, the
header’s value is replaced by the user-
defined parameter’s value.
The valid value range is 1-70. The default is
10.
configure voip > sip-definition
settings > force-generate-to-tag
[ForceGenerateToTag]
Enables the device to generate the 'tag'
parameter's value in the SIP To header.
This is applied to the first SIP response,
received from the called party, which the
device sends to the dialog-initiating SIP
user agent (caller). In other words, this
device-generated To tag overwrites the
original To tag generated by the called
party. All SIP messages between the
device and caller use this generated To tag,
while all SIP messages between the device
and called party use the To tag generated
by the called party. As the device-generated
To tag value is short (up to 12 characters),
this feature may be useful for SIP UAs that
cannot handle long tag values.
An example of the To tag:
To: Alice@company.com; tag =
9777484849@10.10.1.110
[0] = Disable (default). The device
forwards the To tag transparently
between the SIP UAs.
- 1404 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Related product manuals