CHAPTER72 Configuration Parameters Reference
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
'LDAP Authentication Filter'
configure system > ldap
settings > auth-filter
[LDAPAuthFilter]
Defines the LDAP search filter attribute for
searching the login username in the directory's
subtree for LDAP-based user authentication and
authorization.
You can use the dollar ($) sign to represent the
username. For example, if the parameter is set to "
(sAMAccountName=$)" and the user logs in with
the username "SueM", the LDAP query is run for
sAMAccountName=SueM.
'Use LDAP for Web > Telnet Login'
configure system > ldap
settings > enable-mgmt-login
[MgmtLDAPLogin]
Enables LDAP-based management-user login
authentication and authorization.
■ [0] Disable (default)
■ [1] Enable
Note: For the parameter to take effect, a device
reset is required.
[LDAPDebugMode] Determines whether to enable the LDAP task debug
messages. This is used for providing debug
information regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
'LDAP Numeric Attribute'
ldap-numeric-attr
[LDAPNumericAttributes]
Defines up to five LDAP Attributes (separated by
commas) for which the device employs LDAP query
searches in the AD for numbers that may have
characters between the digits.
For more information, see Enabling LDAP Searches
for Numbers with Characters.
'LDAP OCS Number Attribute Name'
configure voip > sip-
definition settings > ldap-
ocs-nm-attr
[MSLDAPOCSNumAttributeName]
Defines the name of the attribute that represents the
user's Skype for Business number in the Microsoft
AD database.
The valid value is a string of up to 49 characters.
The default is "msRTCSIP-Line".
LDAP PBX Number Attribute Name
configure voip > sip-
definition settings > ldap-
pbx-nm-attr
[MSLDAPPBXNumAttributeName]
Defines the name of the attribute that represents the
user PBX number in the Microsoft AD database.
The valid value is a string of up to 49 characters.
The default is "telephoneNumber".
LDAP MOBILE Number Attribute Name
configure voip > sip-
definition settings > ldap-
mobile-nm-attr
[MSLDAPMobileNumAttributeName]
Defines the name of the attribute that represents the
user Mobile number in the Microsoft AD database.
The valid value is a string of up to 49 characters.
The default is "mobile".
- 1435 -
To Next Page
Loading...
