EasyManua.ls Logo

AudioCodes Mediant 800 - Page 157

AudioCodes Mediant 800
1482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER13 Network
Mediant 800 Gateway & E-SBC | User's Manual
Application Traffic / Network Types
Class-of-Service
(Priority)
T.38 traffic Media Media Premium
SIP Control Control Premium
SIP over TLS (SIPS) Control Control Premium
Syslog Management Bronze
SNMP Traps Management Bronze
DNS client Varies according to DNS settings:
OAMP
Control
Depends on
traffic type:
Control:
Control
Premium
Management:
Bronze
NTP Varies according to the interface type
associated with NTP (see Assigning NTP
Services to Application Types):
OAMP
Control
Depends on
traffic type:
Control:
Control
Premium
Management:
Bronze
To configure DiffServ (Layer-3 QoS) values per CoS:
1. Open the QoS Settings page (Setup menu > IP Network tab > Quality folder > QoS
Settings).
2. Click New; the following dialog box appears:
3. Configure DiffServ values per CoS according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 13-9: QoS Settings Parameter Descriptions
Parameter Description
'Media Premium QoS'
media-qos
[PremiumServiceClassMediaDiffServ]
Defines the DiffServ value for Premium Media CoS
content.
The valid range is 0 to 63. The default is 46.
- 117 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Related product manuals