AudioCodes Mediant 800 - Page 163

CHAPTER13 Network
Mediant 800 Gateway & E-SBC | User's Manual
3. Configure an SRV rule according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 13-12:Internal SRV Table Parameter Descriptions
Parameter Description
General
'Index' Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Domain Name'
domain-name
[Srv2Ip_
InternalDomain]
Defines the hostname to be translated.
The valid value is a string of up to 31 characters. By default, no value is
defined.
'Transport Type'
transport-type
[Srv2Ip_
TransportType]
Defines the transport type.
■ [0] UDP (default)
■ [1] TCP
■ [2] TLS
1st/2nd/3rd Entry
'DNS Name (1-3)'
dns-name-1|2|3
[Srv2Ip_Dns1/2/3]
Defines the first, second or third DNS A-Record to which the hostname
is translated.
By default, no value is defined.
'Priority (1-3)'
priority-1|2|3
[Srv2Ip_
Priority1/2/3]
Defines the priority of the target host. A lower value means that it is
more preferred.
By default, no value is defined.
- 123 -