Content
Mediant 800 Gateway & E-SBC | User's Manual
Loading an ini File to the Device 77
Secured Encoded ini File 77
Configuring Password Display in ini File 77
INI Viewer and Editor Utility 78
10 REST-Based Management 79
Part III 81
General System Settings 81
11 Date and Time 82
Configuring Automatic Date and Time using SNTP 82
Configuring Date and Time Manually 83
Configuring the Time Zone 83
Configuring Daylight Saving Time 84
12 Configuring a Hostname for the Device 85
Part IV 86
General VoIP Configuration 86
13 Network 87
Building and Viewing your Network Topology 87
Configuring Physical Ethernet Ports 90
Configuring Ethernet Port Groups 92
Configuring Underlying Ethernet Devices 94
Configuring IP Network Interfaces 97
Networking Configuration Examples 101
Configuring Static IP Routes 104
Configuration Example of Static IP Routes 106
Troubleshooting the Static Routes Table 107
Network Address Translation Support 107
Device Located behind NAT 108
Configuring a Static NAT IP Address for All Interfaces 108
Configuring NAT Translation per IP Interface 109
Remote UA behind NAT 110
SIP Signaling Messages 111
Media (RTP/RTCP/T.38) 111
Robust Receipt of Media Streams by Media Latching 115
Configuring Quality of Service 116
Configuring Class-of-Service QoS 116
Configuring DiffServ-to-VLAN Priority Mapping 118
Configuring ICMP Messages 119
DNS 120
Configuring Default DNS Servers 120
Configuring the Internal DNS Table 121
Configuring the Internal SRV Table 122
Open Solution Network (OSN) Server 124
- xxii -
To Next Page
Loading...
