AudioCodes Mediant 800 - Page 364

CHAPTER17 Quality of Experience
Mediant 800 Gateway & E-SBC | User's Manual
3. Configure a rule according to the parameters described in the table below.
4. Click Apply, and then reset the device with a save to flash memory.
Table 17-6: Bandwidth Profile Table Parameter Descriptions
Parameter Description
General
'Index'
[BWProfile_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Name'
name
[BWProfile_Name]
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 20 characters.
Note: The parameter value cannot contain a forward slash
(/).
'Egress Audio Bandwidth'
egress-audio-bandwidth
[BWProfile_
EgressAudioBandwidth]
Defines the major (total) threshold for outgoing audio traffic
(in Kbps).
'Ingress Audio Bandwidth'
ingress-audio-
bandwidth
[BWProfile_
IngressAudioBandwidth]
Defines the major (total) threshold for incoming audio traffic
(in Kbps).
'Egress Video Bandwidth'
egress-video-bandwidth
[BWProfile_
EgressVideoBandwidth]
Defines the major (total) threshold for outgoing video traffic
(in Kbps).
'Ingress Video Bandwidth'
ingress-video-
bandwidth
[BWProfile_
IngressVideoBandwidth]
Defines the major (total) threshold for incoming video traffic
(in Kbps).
- 324 -