Content
Mediant 800 Gateway & E-SBC | User's Manual
59 Viewing PSTN Status 1022
Viewing Trunks & Channels Status 1022
Viewing NFAS Groups and D-Channel Status 1023
60 Viewing Network Status 1025
Viewing Active IP Interfaces 1025
Viewing Ethernet Device Status 1025
Viewing Ethernet Port Information 1025
Viewing Static Routes Status 1026
Viewing IDS Active Blacklist 1026
Viewing Data Network Performance Monitoring 1027
61 Reporting Information to External Party 1029
Configuring RTCP XR 1029
Call Detail Records 1036
Enabling CDR Generation and Configuring the CDR Server Address 1036
Configuring CDR Filters and Report Level 1037
Configuring CDR Reporting to REST Server 1037
Miscellaneous CDR Configuration 1038
Storing CDRs on the Device 1038
CDR Field Description 1041
Customizing CDRs for Gateway Calls 1077
Customizing CDRs for SBC Calls and Test Calls 1082
Configuring RADIUS Accounting 1086
Querying Device Channel Resources using SIP OPTIONS 1093
Part XI 1095
Diagnostics 1095
62 Syslog and Debug Recording 1096
Configuring Log Filter Rules 1096
Filtering IP Network Traces 1101
Debugging PSTN Calls through CLI 1102
Configuring Syslog 1103
Syslog Message Format 1103
Event Representation in Syslog Messages 1106
Syslog Fields for Answering Machine Detection (AMD) 1107
SNMP Alarms in Syslog Messages 1107
Enabling Syslog 1108
Configuring the Syslog Server Address 1108
Configuring Syslog Message Severity Level 1109
Configuring Syslog Debug Level 1109
Configuring Reporting of Management User Activities 1110
Viewing Syslog Messages 1112
Syslog Message Description for CPU Overload 1113
Configuring Debug Recording 1115
Configuring the Debug Recording Server Address 1115
- xxxvii -
To Next Page
Loading...
