AudioCodes Mediant 800 - Page 381

CHAPTER18 Core Entities
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
■ The parameter is applicable only to the SBC
application.
'Used By Routing Server'
used-by-routing-server
[SRD_UsedByRoutingServer]
Enables the SRD to be used by a third-party routing
server for call routing decisions.
■ [0] Not Used (default)
■ [1] Used
For more information on the third-party routing server
feature, see Centralized Third-Party Routing Server.
'Dial Plan'
sbc-dial-plan-name
[SRD_SBCDialPlanName]
Assigns a Dial Plan to the SRD. The device searches
the Dial Plan for a dial plan rule that matches the
source number and if not found, for a rule that
matches the destination number. If a matching dial
plan rule is found, the rule's tag is used in the routing
and/or manipulation processes as source and/or
destination tags.
To configure Dial Plans, see Configuring Dial Plans.
'CAC Profile'
cac-profile
[SRD_AdmissionProfile]
Assigns a Call Admission Control Profile (CAC rules)
to the SRD.
By default, no value is defined.
To configure CAC Profiles, see Configuring Call
Admission Control on page778.
Registration
'Max. Number of Registered Users'
max-reg-users
[SRD_MaxNumOfRegUsers]
Defines the maximum number of users belonging to
the SRD that can register with the device.
The default is -1, which means that the number of
allowed user registrations is unlimited.
Note: The parameter is applicable only to the SBC
application.
'User Security Mode'
block-un-reg-users
[SRD_BlockUnRegUsers]
Defines the blocking (reject) policy for incoming SIP
dialog-initiating requests (e.g., INVITE messages)
from registered and unregistered users belonging to
the SRD.
■ [0] Accept All = (Default) Accepts requests from
registered and unregistered users.
■ [1] Accept Registered Users = Accepts
requests only from users registered with the
device. Requests from users not registered are
rejected.
- 341 -