To Next Page

To Previous Page

CHAPTER19 Coders and Profiles

Mediant 800 Gateway & E-SBC | User's Manual

2. Click New; the following dialog box appears:

3. Configure a name for the Allowed Audio Coders Group according to the parameters described

in the table below.

4. Click Apply.

5. Select the new row that you configured, and then click the Allowed Audio Coders link

located below the table; the Allowed Audio Coders table opens.

6. Click New; the following dialog box appears:

7. Configure coders for the Allowed Audio Coders Group according to the parameters described in

the table below.

8. Click Apply.

Table 19-3: Allowed Audio Coders Groups and Allowed Audio Coders Tables Parameter Descriptions

Parameter Description

Allowed Audio Coders Groups Table

'Index'

allowed-audio-coders-

groups <index>

[AllowedAudioCodersGroups_

Index]

Defines an index number for the new table row.

Note: Each row must be configured with a unique

index.

'Name'

coders-group-name

[AllowedAudioCodersGroups_

Name]

Defines a descriptive name, which is used when

associating the row in other tables.

The valid value is a string of up to 40 characters.

Note:

■ Each row must be configured with a unique name.

■ The parameter value cannot contain a forward slash

(/).

- 411 -

AudioCodes Mediant 800 User Manual

Other manuals for AudioCodes Mediant 800