EasyManua.ls Logo

AudioCodes Mediant 800 - Page 475

AudioCodes Mediant 800
1482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER19 Coders and Profiles
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
'Dynamic Jitter Buffer
Optimization Factor'
jitter-buffer-
optimization-factor
[IpProfile_JitterBufOptFactor]
Defines the Dynamic Jitter Buffer frame error/delay
optimization factor.
The valid range is 0 to 12. The default factor is 10.
For more information on Jitter Buffer, see Configuring the
Dynamic Jitter Buffer.
Note:
For data (fax and modem) calls, set the parameter to
12.
The corresponding global parameter is
DJBufOptFactor.
'Jitter Buffer Max Delay'
jitter-buffer-max-delay
[IpProfile_JitterBufMaxDelay]
Defines the maximum delay and length (in msec) of the
Jitter Buffer.
The valid range is 150 to 2,000. The default is 250.
Voice
'Echo Canceler'
echo-canceller
[IpProfile_
EnableEchoCanceller]
Enables the device's Echo Cancellation feature (i.e., echo
from voice calls is removed).
[0] Disable
[1] Line (default)
[2] Acoustic
For a detailed description of the Echo Cancellation feature,
see Configuring Echo Cancellation.
Note: The corresponding global parameter is
EnableEchoCanceller.
'Input Gain'
input-gain
[IpProfile_InputGain]
Defines the pulse-code modulation (PCM) input gain
control (in decibels). For the Gateway application: Defines
the level of the received signal for Tel-to-IP calls.
The valid range is -32 to 31 dB. The default is 0 dB.
Note: The corresponding global parameter is InputGain.
'Voice Volume'
voice-volume
[IpProfile_VoiceVolume]
Defines the voice gain control (in decibels). For the
Gateway application: Defines the level of the transmitted
signal for IP-to-Tel calls.
The valid range is -32 to 31 dB. The default is 0 dB.
Note: The corresponding global parameter is VoiceVolume.
SBC Signaling
'PRACK Mode'
sbc-prack-mode
[IpProfile_SbcPrackMode]
Defines the device's handling of SIP PRACK messages
for the SIP entity associated with the IP Profile.
[1] Optional = PRACK is optional. If required, the
device performs the PRACK process on behalf of the
SIP entity.
- 435 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Related product manuals