AudioCodes Mediant 800 - Page 572

CHAPTER21 SIP Message Manipulation
Mediant 800 Gateway & E-SBC | User's Manual
This manipulation example is done by configuring two Message Manipulation rules, where Rule #1
is assigned to the source IP Group and Rule #2 to the destination IP Group.
Parameter Rule 1 Rule 2
Message Type Invite.request Invite.request
Condition Header.Unkown_header !contains 'unknown_
value'
Header.P-Asserted-
Identity.URL.User ==
'Susan'
Action Subject Header.Unkown_header Header.P-Asserted-
Identity
Action Type Remove Modify
Action Value '<sip:200@212.3.216.1>'
- 532 -