AudioCodes Mediant 800 - Page 753

CHAPTER28 Configuring Supplementary Services
Mediant 800 Gateway & E-SBC | User's Manual
The figure above shows a configuration example where ä is converted to ae.
3. Configure a Character Conversion rule according to the parameters described in the table
below.
4. Click Apply.
Table 28-8: Char Conversion Table Parameter Descriptions
Parameter Description
'Index'
[CharConversion_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Character Name'
char-name
[CharConversion_
CharName]
Defines a descriptive name, which is used when associating the row in
other tables.
The valid value is a string of up to 40 characters.
Note: Each row must be configured with a unique name.
'First Byte'
first-byte
[CharConversion_
FirstByte]
Defines the first byte of the Unicode character (e.g., 195).
The default is 194.
'Second Byte'
second-byte
[CharConversion_
SecondByte]
Defines the second byte of the Unicode character (e.g., 164).
The default is 128.
'Converted Output'
converted-
output
[CharConversion_
ConvertedOutput]
Defines the ASCII character (e.g., "ae") to which the Unicode character
must be converted.
The valid value is a string of up to four characters.
The valid value is up to four ASCII characters. This can include any
ASCII character - alphanumerical (e.g., a, A, 6) and/or symbols (e.g., !,
?, _, &).
- 713 -