AudioCodes Mediant 800 - Page 873

CHAPTER35 SBC Manipulations
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
General
'Index'
[IPOutboundManipulation_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'Name'
manipulation-name
[IPOutboundManipulation_
ManipulationName]
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters. By default, no
value is defined.
'Additional Manipulation'
is-additional-
manipulation
[IPOutboundManipulation_
IsAdditionalManipulation]
Determines whether additional manipulation is done for the table
entry rule listed directly above it.
■ [0] No = (Default) Regular manipulation rule - not done in
addition to the rule above it.
■ [1] Yes = If the previous table row entry rule matched the
call, consider this row entry as a match as well and perform
the manipulation specified by this rule.
Note: Additional manipulation can only be done on a different
item (source URI, destination URI, or calling name) to the rule
configured in the row above (configured by the 'Manipulated URI'
parameter).
'Call Trigger'
trigger
[IPOutboundManipulation_
Trigger]
Defines the reason (i.e., trigger) for the re-routing of the SIP
request.
■ [0] Any = (Default) Re-routed for all scenarios (re-routes and
non-re-routes).
■ [1] 3xx = Re-routed if it triggered as a result of a SIP 3xx
response.
■ [2] REFER = Re-routed if it triggered as a result of a REFER
request.
■ [3] 3xx or REFER = Applies to options [1] and [2].
■ [4] Initial only = Regular requests that the device forwards
to a destination. In other words, re-routing of requests
triggered by the receipt of REFER or 3xx does not apply.
Match
'Request Type'
request-type
[IPOutboundManipulation_
RequestType]
Defines the SIP request type to which the manipulation rule is
applied.
■ [0] All = (Default) all SIP messages.
■ [1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.
■ [2] REGISTER = Only SIP REGISTER messages.
■ [3] SUBSCRIBE = Only SIP SUBSCRIBE messages.
■ [4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.
■ [5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
- 833 -